VISSONIC ELECTRONICS LIMITED
VISSONIC ELECTRONICS LIMITED WWW.VISSONIC.COM Digital DSP Conference system manufacturer
Add to Cart
Desktop Conference Microphone CAT5 Wired Digital Discussion Delegate Unit
Features
1. Stylish, low profile design with touchable interface
2. Standard CAT5e and RJ45 connectors are used in CLEACON series to provide more convenient on project and maintenance.
3. The connection of MIC units are either hiding underneath or from the rear of the unit, makes it convenient for different request of installation,
4. OLED screen, providing excellent brightness, contrast, wide viewing angle but low power consumption
Internal high fidelity loudspeaker
5. Head-set interface in both sides with volume adjust
6. Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference
7. The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
8. Strong system robust by the "Hand-in-Hand-Loop-Network" connection method.
9. Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically
10. All units can be configured as Chairman or Delegate unit through software settings based on model DCC-T.
Technical Parameters
Button: Touchable interface, no physical buttons
Sound Pickup: heart type capacitance
Display: OLED display 128 × 32
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Connection: CAT5 / CAT6 cable + snap
Equivalent noise: 20dBA (SPL)
Main material: ABS
The maximum sound pressure: 125dB (THD <3%)
Weight: 1.1kg (with microphone)
Dimension: 185W × 130 D× 50H mm (without microphone)
Operating temperature: 0 ℃ to + 55 ℃
Color: Black